russia hypertronics corporation c/o john crane sealing systems b.afanasyevsky per., 41a moscow 119019 russia t / f: +78452 462149 e: inforussia@hypertronics.com europe hypertac limited 36 waterloo road london nw2 7uh, uk t: +44 (0) 20 8450 8033 f: +44 (0) 20 8208 4114 e: info@hypertac.co.uk hypertac spa via p.d. da bissone 7a, 16153 genova-sestri p., italy t: +39 0 10 60361 f: +39 0 10 6036280 e: info@hypertac.it hypertac gmbh ulrichsberger stra?e 17, 94469 deggendorf, germany t: +49 (0) 991 250120 f: +49 (0) 991 2501244 e: info@hypertac.de hypertac s.a. 31 rue isidore maille, 76410 st. aubin ls elbeuf, france t: +33 (0) 2 32969176 f: +33 (0) 2 32969170 e: info@hypertac.fr for further information visit www.hypertronics.com distributor global sales offices america hypertronics corporation 16 brent drive hudson, ma 0174, usa t: +1 (0) 978 5680451 f: +1 (0) 978 5680680 e: info@hypertronics.com asia hypertac china unit f1, 7th floor, east ocean center phase ii, no.618 yan'an road east shanghai, china 200001 t: +86 21 3318 4650 f: +86 21 5385 5377 e: infochina@hypertronics.com hypertac india c/o john crane sealing systems india pvt. ltd. no.11, 1 st phase peenya industrial area, bangalore-560058, india t: +91 80 2839 2200 f: +91 80 2839 8205/06 e: info@hypertac.fr hypertac japan toward-senju no.1, 801, senju 3-6, adachi, tokyo, japan, 120-0034 t: +81-3-3870-8205 f: +81-3-3870-8264 e: info.japan@hypertac.it copyright? 2010 hypertronics corporation - all rights reserved. hypertac is a registered trademark of smiths and/or its subsidi aries and affiliates. hypertronics and the h logo are trademarks of hypertronics corporation. all other names and marks are property of t heir respective owners. hyp-039-0110 d series supplement to hypertronics 2010 full line catalog hyp_doseries_supl_4prt.qxd:layout 1 12/24/09 8:19 am page 2
d series 2 / 1 www.hypertronics.com dimensions are in inches [mm] dimensions are in inches [mm] d series 2 / 2 www.hypertronics.com mounting dimensions part number series maximum recommended panel thickness in steel maximum recommended panel thickness in alum. tbd d00 0.048 [1.25] 0.075 [1.90] t1903 d01 0.048 [1.25] 0.075 [1.90] t1904 d02 0.062 [1.60] 0.094 [2.40] circular plastic connectors ? 3, 4, 5, 7, 9, 12 and 25 position models ? 1 to 8 amps per contact ? mixed signal and power or coax available ? each connector half accepts pins or sockets ? high temp ultem plastic body ? quick disconnect push button release ? alignment and polarization provided by housing ? crimp, solder cup, and pc contacts dimension d00 housing d01 housing d02 housing a 0.788 [20.00] 1.142 [29.00] 1.358 [34.50] b 1.096 [27.83] 1.614 [41.00] 1.950 [49.50] c 1.181 [30.00] 1.732 [44.00] 2.087 [53.00] d n/a 2.400 [61.00] 2.953 [75.00] f n/a 1.500 [38.00] 1.772 [45.00] g dia. n/a 0.512 [13.00] 0.709 [18.00] h cable dia. 0.089 [2.50] min. 0.158 [4.00] max. 0.118 [3.00] min. 0.216 [5.50] max. 0.197 [5.00] min. 0.315 [8.00] max. j dia. 0.352 [8.94] 0.472 [12.00] 0.709 [18.00] k 0.114 [2.88] 0.161 [4.10] 0.278 [7.00] l m8 x 1.00 m11 x 1.00 thd. m15 x 1.00 thd. m 0.323 [8.20] 0.512 [13.00] 0.669 [17.00] n 0.320 [8.12] 0.512 [13.00] 0.689 [17.50] q dia. 0.092 [2.34] 0.126 [3.20] 0.100 [2.54] r 0.161 [4.10] 0.220 [5.60] 0.295 [7.50] s dia. 0.323 [8.20] 0.441 [11.20] 0.598 [15.20] hole punches note: 1) recommended tightening torque for panel mount receptacle (0.452?0.678 n?m) for both d01 and d02. connector dimensions ee/ep receptacle mating face ee 1 panel mount receptacle ep cable mount receptacle p plug panel mount receptacle (ee) d01 shown cable mount receptacle (ep) d01 shown plug (p) d01 shown hyp_doseries_supl_4prt.qxd:layout 1 12/24/09 8:19 am page 4
d series 2 / 3 www.hypertronics.com dimensions are in inches [mm] d series dimensions are in inches [mm] 2 / 4 www.hypertronics.com accessories 3 pin 4 pin 9 pin crimp tool afm8 or (m22520/2-01) afm8 or (m22520/2-01) afm8 or (m22520/2-01) positioner k547 k547 t1914 removal tool s/dem1.0060 s/dem1.0060 ? insertion tool t1866 t1866 t1916 d01 general specifications 3 pin 4 pin 9 pin contact diameter 0.024 [0.60] 0.024 [0.60] 0.016 [0.40] current rating (amps) 4 4 1 contact resistance (milliohms) < 5 < 5 < 8 extraction force per contact (oz.) 0.50 to 2.00 0.50 to 2.00 0.60 to 1.60 contact life cycles 100,000 100,000 100,000 breakdown voltage between contacts > 2250v > 2250v > 1000v dielectric withstanding voltage 1650v 1650v 750v contact socket material beryllium copper wires and brass body (socket) pin material brass (pin) plating material gold over nickel insulation resistance > 10 3 megohms at 500 vdc temperature rating -40 c to 125 c d00 general specifications 5 pin contact diameter 0.012 [0.30] current rating (amps) 1 contact resistance (milliohms) < 6.7 extraction force per contact (oz.) 0.35 to 1.6 contact life cycles up to 100,000 breakdown voltage between contacts > 1000v dielectric withstanding voltage >750v contact socket material beryllium copper wires and brass body (socket) pin material brass; gold over nickel (pin) plating material gold over nickel insulation resistance > 10 3 megohms at 500 vdc temperature rating -40 c to 125 c accessories 3 pin 7 and 9 pin 12 pin 25 pin crimp tool af8 afm8 or m22520/2-01 afm8 or m22520/2-01 afm8 or m22520/2-01 positioner tp688 k623 t870 t1914 removal tool s/dem5.0150 s/dem1.0060 ? ? insertion tool t1888 t1866 t1271 t1916 d02 general specifications 3 pin 7 pin 9 pin 12 pin 25 pin contact diameter 0.059 [1.50] 0.024 [0.60] 0.024 [0.60] 0.018 [0.50] 0.016 [0.40] current rating (amps) 8 4 4 2.5 1 contact resistance (milliohms) < 2 < 5 < 5 < 8 < 8 extraction force per contact (oz.) 1.80 to 5.40 0.50 to 2.00 0.50 to 2.00 0.30 to 1.60 0.30 to 1.60 contact life cycles 100,000 100,000 100,000 100,000 100,000 breakdown voltage between contacts > 2250 > 2000 > 1560 > 1000 > 1000 dielectric withstanding voltage 1650 1500 1150 750 750 contact socket material beryllium copper wires and brass body (socket) pin material brass (pin) plating material gold over nickel insulation resistance > 10 3 megohms at 500 vdc temperature rating -40 c to 125 d00 5 pin receptacle seen from mating side housing options example part numbers receptacle panel mount plug d00eeb503frutah d00pb503mruth contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 26-28 awg crimp pin ? 26-28 awg tools crimp tool crimp positioner insertion tool afm8 or m22520/2-01 t1914 t1916 1 2 3 4 5 hyp_doseries_supl_4prt.qxd:layout 1 12/24/09 8:19 am page 6
d series d series dimensions are in inches [mm] 2 /6 www.hypertronics.com 2 / 5 www.hypertronics.com dimensions are in inches [mm] d01 3 pin receptacle seen from mating side housing options example part numbers receptacle panel mount receptacle cable plug d01eeb306frutah d01epb306frutah d01pb306mrut contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 22-26 awg crimp socket ? 18-20 awg solder cup socket ? up to 22 awg crimp pin ? 22-26 awg crimp pin ?18-20 awg solder cup pin ? up to 22 awg tools crimp tool crimp positioner removal tool insertion tool afm8 or m22520/2-01 k547 s/dem1.0060 t1866 d01 4 pin receptacle seen from mating side housing options example part numbers receptacle panel mount receptacle cable plug d01eeb406frutah d01epb406frutah d01pb406mrut contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 22-26 awg crimp socket ? 18-20 awg solder cup socket ? up to 22 awg crimp pin ? 22-26 awg crimp pin ?18-20 awg solder cup pin ? up to 22 awg tools crimp tool crimp positioner removal tool insertion tool afm8 or m22520/2-01 k547 s/dem1.0060 t1866 d01 9 pin receptacle seen from mating side housing options example part numbers receptacle panel mount receptacle cable plug d01eeb904frutah d01epb904frutah d01pb904mrut contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 26-28 awg solder cup socket ? up to 26 awg crimp pin ? 26-28 awg solder cup pin ? up to 26 awg tools crimp tool crimp positioner insertion tool afm8 or m22520/2-01 t1914 t1916 d02 3 pin receptacle seen from mating side housing options example part numbers receptacle panel mount receptacle cable plug d02eeb315frutah d02epb315frutah d02pb315mrut contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 18 and 20 awg solder cup socket ? up to 16 awg crimp pin ?18 and 20 awg solder cup pin ? up to 16 awg tools crimp tool crimp positioner removal tool insertion tool af8 tp688 s/dem5.0150 t1888 d02 7 pin receptacle seen from mating side housing options example part numbers receptacle panel mount receptacle cable plug d02eeb706frutah d02epb706frutah d02pb706mrut contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 22-26 awg solder cup socket ? up to 22 awg crimp pin ? 22-26 awg solder cup pin ? up to 22 awg tools crimp tool crimp positioner removal tool insertion tool afm8 or m22520/2-01 k623 s/dem1.0060 t1866 d02 9 pin receptacle seen from mating side housing options example part numbers receptacle panel mount receptacle cable plug d02eeb906frutah d02epb906frutah d02pb906mrut contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 22-26 awg solder cup socket ? up to 22 awg crimp pin ? 22-26 awg solder cup pin ? up to 22 awg tools crimp tool crimp positioner removal tool insertion tool afm8 or m22520/2-01 k623 s/dem1.0060 t1866 hyp_doseries_supl_4prt.qxd:layout 1 12/24/09 8:19 am page 8
d series d series dimensions are in inches [mm] 2 / 8 www.hypertronics.com 2 / 7 www.hypertronics.com dimensions are in inches [mm] d02 12 pin receptacle seen from mating side housing options example part numbers receptacle panel mount receptacle cable plug d02eeb125frutah d02epb125frutah d02pb125mrut contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 22-26 awg solder cup socket ? up to 22 awg crimp pin ? 22-26 awg solder cup pin ? up to 22 awg tools crimp tool crimp positioner insertion tool afm8 or m22520/2-01* t870 t1271 d02 25 pin receptacle seen from mating side housing options example part numbers receptacle panel mount receptacle cable plug d02eeb2504frutah d02epb2504frutah d02pb2504mrut contact options see part number configurator on page 2/10 for complete ordering information. crimp socket ? 26-28 awg solder cup socket ? up to 26 awg crimp pin ? 26-28 awg solder cup pin ? up to 26 awg tools crimp tool crimp positioner insertion tool afm8 or m22520/2-01 t1914 t1916 general specifications contacts power signal number of contacts 2 7 diameter 0.059 [1.50] 0.018 [0.50] current rating (amps) 8 2.50 contact resistance < 2.0 milliohms < 8.0 milliohms extraction force 1.8 to 5.4 oz. 0.3 to 1.6 oz. contact material pins sockets brass beryllium copper wires and brass body insulator material receptacle plug polycarbonate polycarbonate flammability ul94v0 temperature rating -40 c to 85 c insulation resistance > 10 mohm at 500 vdc d02 power and signal receptacle seen from mating side housing options example part numbers* receptacle panel mount plug d02eeb215/705frutah d02pb215/705mrut contact options see part number configurator on page 2/10 for complete ordering information. power socket ? 16-20 awg power pin ? 16-20 awg signal socket ? 22-26 awg signal pin ? 22-26 awg tools crimp tool crimp positioner (pin) crimp positioner (socket) removal tool insertion tool power signal af8 afm8 t1164 t870 tp688 t870 t1124 ? ? t1215 combination connectors power and signal ? two 8 amp and seven 2.5 amp signal contacts ? crimp contacts note: *b = black polycarbonate available in power and signal. hyp_doseries_supl_4prt.qxd:layout 1 12/24/09 8:19 am page 10
d series d series dimensions are in inches [mm] 2 / 10 www.hypertronics.com 2 /9 www.hypertronics.com dimensions are in inches [mm] d02 coax or power and signal receptacle seen from mating side housing options example part numbers 1 receptacle panel mount receptacle cable plug d02eeb905fr1c1frutha d02epb905fr1c1frutha d02pb905mr1c1mrut contact options see part number configurator on page 2/10 for complete ordering information. coax crimp socket ? rrg 316, rg316db coax solder cup socket ? rg405, t-flex 405 coax crimp pin ? rg316, rg316db coax solder cup pin ? rg405, t-flex 405 power crimp socket ? 12 awg power crimp pin ? 12 awg signal crimp socket ? 22-26 awg signal solder cup socket ? 22-26 awg signal crimp pin ? 22-26 awg signal solder cup pin ? 22-26 awg tools coax crimp tool hx3 (outer) afm8 (inner) crimp die set t1958 (outer) or t2019 (outer for rg316db) crimp positioner t1957 (inner) removal tool t1982 insertion tool ? power m309 ? ? ? ? t1981 t1982 ? signal afm8 ? ? ? ? t870 ? t1215 notes: 1) h = black polyetherimide (high temperature). 2) available in coax or power and signal. combination connectors coax or power and signal plating reference male pins: t = 10in gold (min) over nickel (na 0n d00) th = 50in gold (min) over nickel female sockets: tah = 50in gold (min) over nickel on mating surface, gold flash over nickel on termination tabh = 50in gold (min) over nickel on mating surface, tin lead over nickel on termination (d & b only) ordering information d02 905 r u th b m r 1c1 m p connector housing d02 coax contact gender m = male f = female signal contact gender m = male f = female color b = black insulator p = plug ee = receptacle panel mount ep = receptacle cable mount contact arrangement 905 terminal styles r = crimp s = solder terminal styles r = crimp s = solder plating see plating reference material u = ultem 1010r coaxial/power cable type 1c1 = rg316 (crimp) 1c2 = t-flex 405, rg 405 (solder only, cannot be used with crimp) 1c3 = rg316db 1p1 = 12 awg d02 coax or power and signal ordering information *note: color code indicators are custom order only. d01 306 u tabh b f r p connector housing d00, d01, d02 contact gender m = male f = female main body color b = black insulator p = plug ee = receptacle panel mount ep = receptacle cable mount (ep not available for 215/705 or 503 style) contact arrangement d00 5 pin = 503 d01 3 pin = 306 d01 4 pin = 406 d01 9 pin = 904 d02 3 pin = 315 d02 7 pin = 706 d02 9 pin = 906 d02 12 pin = 125 d02 25 pin = 2504 d02 power/signal = 215/705 terminal styles r = crimp (shipped unassembled) d00 available with "r" termination only (for crimp or solder) rr = crimp for 18-20 awg (d01/306 and d01/406 only. (shipped unassembled) s = solder cup (shipped unassembled) plating see plating reference material u = ultem 1010r *note: color code indicators are custom order only. d00 panel mount receptacle with 6" pigtail leads pretermination = d00eeb-001 ** mounting options are available, see http://www.hypertronics.com/en/products/circular-connectors/d-series.aspx or call (978) 568-0451 for more information. hyp_doseries_supl_4prt.qxd:layout 1 12/24/09 8:19 am page 12
|
